Can etrailer.com 3,500 Pound Electric Brake Assemblies WOrk on Dexter 3,500 Pound Axle
Question:
will your p/n # AKEBRK-35 fit a Dexter 3500# axle? thanks
asked by: Bob M
Expert Reply:
Yes, as long as you have a 3,500 pound axle with 10 x 2-1/4 inch hubs the etrailer.com Electric Trailer Brake Kit # AKEBRK-35 that you referenced will fit and work perfectly. It is not required to have Dexter brakes on your Dexter axle. In fact the etrailer.com assemblies feature a thicker brake pad material that is cut (instead of "snapped) during the production process that results in a cleaner, crack free edge that helps to extend the life of the pads. One other thing you will just want to make sure of is that the 4 bolt pattern on these brakes matches what you have on your axle mounting flanges. Both the left hand and right hand assemblies are included with this kit.
I have attached a short video demonstration on this product that you can also check out.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35 Review
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hitch
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Video: etrailer Electric Trailer Brake Kit Review and Installation
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: 171255
- Search Results: 22575 r15
- Search Results: brkh10b
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Mounting Hardware for 10" Brake Assemblies
- Q&A: Tips for How to Identify a Trailer Axle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Bearing Repacking and Grease Seals Installation
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Troubleshooting Electric Brakes That Do Not Work
- Q&A: How to Determine Which Side of Trailer a Brake Assembly Should Install on
- Q&A: What Causes Weak Trailer Brakes on Trailer After New Assemblies Installed
- Q&A: Do All 3500 lb Axles Use a 10 Inch Brake Assembly
- Shop: Brake Controller
- Shop: Trailer Wiring
- Q&A: Recommended Brakes for a 2018 Forest River Flagstaff Hard Side Camper T21QBHW
- Q&A: How to Determine Correct Replacement Trailer Brake Assemblies
- Search Results: 12 20 lug nuts
- Article: Trailer Wiring Diagrams