How to Determine the Correct Bow Roller Needed For a 1999 Tidewater Boat Trailer

Question

Question:

tidewater trailers 1999 need the bow roller

asked by: Joel C

0

Expert Reply:

To select the correct Bow Roller or Bow Guard, see links, for your Tidewater boat trailer, you will need to measure to determine the proper size. The width of the roller and diameter of the shaft that the roller installs on will be needed.

Most boats that use a roller use the 3 inch Rubber Bow Roller, # YR3143-4, that you referenced, at the point closest to the trailer winch. This roller accepts a 1/2 inch diameter shaft.

expert reply by: Robert G

0

Answer 1

I went out to the warehouse and measured the Demco Hydraulic Brake Actuator item #DM72VR. The bolt hole spread is 3". I have linked a diagram below. I have linked a diagram I made below and another one that will show you a few dimensions.

view full answer...

Answer 2

I can understand how this can be a bit confusing. Brake actuators, like the Demco Hydraulic Trailer Brake Actuator, #DM72VR, with no lock-out are typically more economical and are perfect for trailers equipped with free-backing brakes because the…

view full answer...

Answer 3

Yes, we do have the Demco Hydraulic Brake Actuator #DM72VR. The Demco #DM72VR is a surge brake actuator for drum brakes that is rated for 7,000 lbs and accepts a 2" hitch ball.

view full answer...

Answer 4

If the distance on center between two studs of your hub is 3 inches the bolt pattern you have is 5 on 5 inch. The next piece of info I need is the diameter of the "snout" of your hub where the wheel fits over. That's so I can pick out…

view full answer...

Answer 5

I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light #STL22RB is a great option for an LED upgrade. These lights use pigtail #A47PB and will fit the mounts…

view full answer...

Answer 6

In order to install Rhino-Rack HD bars on your 2023 GMC Sierra 1500 you'll need the following parts: - 59" HD Crossbars #RB1500B-2 - 2500 Series Legs for HD Bars #RRRLKHD - DK Fit Kit #DK427 I'm not 100% sure what multi-purpose holders…

view full answer...

Answer 7

The cupholder portion of the Optronics #2409171B is adjustable between roughty 2-1/2" and 3-3/4" so this would be a good fit for you if you're referring to the beverage holder dimensions. The casing dimensions on this cup holder are…

view full answer...

Answer 8

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

view full answer...

Answer 9

Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a 4…

view full answer...

Answer 10

The Yates Endcap for Boat Trailer Rollers part #YR130-4 will work great with the Yates Bow Roller for Boat Trailers part #YR300BLK. If you need a roller shaft as well, I recommend the Roller Shaft with Pal Nuts part #CE10701A.

view full answer...

Answer 11

The correct replacement leaf springs for a Malone MicroSport Trailer part #MPG460G is the 2-Leaf Slipper Spring part #e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that…

view full answer...

Answer 12

I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything…

view full answer...

How to Determine the Correct Bow Roller Needed For a 1999 Tidewater Boat Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching