Spare Tire Carrier for 4 Lug Trailer Wheel

Question:

Ok. This is a 15 inch 4 lug wheel. I’ll try it if you think it will work

asked by: Greg

Expert Reply:

I do have options for your 4 lug wheel but the Bumper Mounted Tire Carrier part # TR-1 only works with 5, 6, and 8 lug wheels. Unfortunately, we do not have any spare tire carriers that will work with a 4 lug wheel and affix to a 4" wide x 4" tall rear bumper. Check out the Fulton # FSTC1000301 which can mount on the trailer frame or back 4X4 inch bumper.

I have attached a list of our spare tire carries that will work with a 4 lug wheel for you as well.

expert reply by: Conner L

Greg

8/13/2018

The maxx tow spare tire carrier will work but won’t fit 4x4 square tube bumper. Couldn’t you just replace the bolts for longer ones? Seems logical.

Conner L.

8/13/2018

It's funny you mentioned that because I had the same thought in regards to the MaxxTow Spare Tire Carrier part # MT70214 but no way to confirm it. However, after further reviewing the design I don't see any reason as to why it could not be used on a 4" wide x 4" tall bumper so long as the bolts are replaced by most likely a grade 5, 4-1/2" hex head bolt. I also recommend using either a lock washer and nut or nyloc nut to secure the bolts as this will prevent them from backing out.

Greg

8/14/2018

Ok. This is a 15 inch 4 lug wheel. I’ll try it if you think it will work

Conner L.

8/14/2018

There will not be any issues using the MaxxTow Spare Tire Carrier part # MT70214 with your 15" diameter wheels if you have a 4 on 4" lug pattern. The only issue will be the 4" wide x 4" tall bumper which as we discussed does not seem to be a problem once the longer bolts are obtained.