How to Select the Correct Hub for Trailer
Question:
Hi, i have a boat trailer, with sticker perfomance trailers SA 18-20,inch on it, my hub was damaged and i need a new one, the inner bearing marked with L6814 and L6811 last digits cant be identifyed the outer bearing was damaged, so i cant read it. Measuring distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it i have 6.68 cms - about 2.63 inches which is closed to 2-5/8 . Just want to be sure this hub will fit my trailer,
asked by: Anton O
Expert Reply:
The Trailer Idler Hub Assembly for 3,500-lb Axles # 84545BX should work for you based on the information you gave, though you can make absolutely sure by using a digital caliper and measure your spindle to the thousandths of an inch where the outer bearing and grease seal ride.
You can use the photo I've attached to see exactly where you need to measure. If you get a 1.063" measurement where the outer bearing rides and 1.719" where the grease seal rides then Idler Hub # 84545BX will fit.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Karrier ST205/75R15 Radial Trailer Tire with 15" White Spoke Wheel - 5 on 4-1/2 - Load Range C
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: bearing grease
- Q&A: Adding Larger Wheels to Trailer Hub Assembly with Same Bolt Pattern
- Q&A: Replacement Trailer Hub for 1.06 Inch Straight Spindle on Boat Trailer
- Q&A: Pilot Diameter and Tire Brand on the ST205/75-R15 Radial Trailer Tire and White Spoke Wheel
- Q&A: Parts Needed to Install Brakes on a Tandem Trailer with Hayes 3,500 lb Axles
- Q&A: Recommended Spare for Dexstar 17-231 15 Wheels on Trailer
- Q&A: Can Trailer Use Both Radial Tires and Bias Tires
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: Dexstar Tires and Wheels - Wheel Only - AM20522 Review