Why Would Shackle Angle Change on Trailer Suspension After Leaf Spring Change
Question:
On level ground should the straps be mostly straight up and down? I replaced shackle hangers and I know I have them within 1 thirty second of inch on length of trailer where originals were. Only thing is on originals there was a tall shackle in center and 2 shorter ones on outside end spring. The new ones i welded on were all tall ones So on level ground 1 of straps is leaning much more than other side of equalizer. Will this work?
asked by: Anthony D
Helpful Expert Reply:
Shackles should angle away from the hanger so that as the leaf spring stretches when compressed it can add the added length as needed. If you installed new springs it's not uncommon to see that distance seem smaller since leaf springs have a tendency to stretch over time.
Product Page this Question was Asked From
Replacement Shackle Strap - 2-5/8" Long
- Trailer Leaf Spring Suspension
- Shackle Links
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 2-5/8 Inch Long
- etrailer
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: Aluminum HWT Series S5 Trailer Wheel - 16" x 6-1/2" Rim - 6 on 5-1/2 - Black
- Search Results: mcl32abb
- Shop: Fifth Wheel Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: HWT Tires and Wheels - Wheel Only - AM22658HWTB Review
- Video: Review of RV Ride Control Trailer Leaf Spring Suspension - Alignment and Lift Kits - RR23QX
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation - Enclosed Trailer
- Shop: LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - Black Base - Amber Lens
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Q&A: Should a Spindle That is Chipping be Replaced
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Video: Review of TruRyde Trailer Spindles - Standard BT8 Spindle - TRU94FR
- Video: Optronics Trailer Lights - Tail Lights - STL17RB Review
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Search Results: tie plates
- Q&A: Replacement Leaf Spring Needed for 5th Wheel with 6,000 Pound Axles
- Q&A: Typical Leaf Deflection for Trailer Leaf Spring
- Q&A: What Factors to Consider when Picking Out a Leaf Spring when Adding an Axle to a Trailer
- Search Results: trailer wire
- Search Results: wire
- Search Results: trailer wiring
- Q&A: What Can be Done to Lower Nose of Fifth Wheel Trailer
- Q&A: How to Choose Correct Replacement 6K Leaf Spring for Montana High Country 5th Wheel
- Q&A: How Does the Correct Track Trailer Alignment and Lift Kit Really Work
- Search Results: 12 20 lug nuts