Replacement Brake Assemblies for 1997 Fleetwood Mallard
Question:
I am replacing the brakes on my 1997 Fleetwood Mallard. The inner brake has no bolts of other way to remove it. I believe it is a Axle Beam with Dexter drums. So is there a way to remove the inner brake?
asked by: Melissa H
Expert Reply:
Your 1997 Fleetwood Mallard uses standard brake assemblies and hubs. To remove the hub, you will need to remove the spindle nut and then pull the hub/drum assembly off the spindle to access the brake assembly. If the hubs have been on for a long time sometimes using a rubber mallet around the edges of the drum will help get it to move more easily.
If you have 12 inch diameter brake assemblies, then you will want assembly # AKEBRK-7-SA. If you have 10 inch diameter assemblies you will instead want # AKEBRK-35-SA. Based on your description, I assume you have the 12 inch diameter system, but you can simply measure it to ensure fit.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Torque Spec For Leaf Spring Shackle Bolts
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Video: etrailer Trailer Brakes AKBRKR-SP Review
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: 12 x 2 electric brake assembly
- Search Results: bearing packer
- Search Results: 84 axle
- Search Results: packing trailer bearing
- Q&A: Electric Trailer Brakes not Working
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Recommended Trailer Brake Assemblies for 1998 Fleetwood Mallard 24J Travel Trailer
- Q&A: Replacement Trailer Axle to Replace Trailer with Older Style Brakes that Are Outdated
- Q&A: How to Find Replacement Electric Brake Assemblies for 1994 Fleetwood Mallard
- Q&A: Replacement 12 Inch Brake Assemblies Compatible with Old Warner Trailer Hub/Drums