Can Grease Fittings of Spindle be Left on if Bearing Buddy is Installed
Question:
Should I remove existing grease fittings before buddies installed?
asked by: Dennis
0
Expert Reply:
If your spindles have grease fittings that means they are EZ lube spindles which means you don't need the Bearing Buddies. EZ lube spindles are actually better overall than Bearing Buddies since they deposit grease in the center of the hub and not just try to push it through the front. That said, if you want to use Bearing Buddies on a trailer with grease fittings they would have to come off since they will not fit behind the Bearing Buddy.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Could/Should Zerk Fitting of EZ Lube Spindle Be Removed to Install Bearing Buddies
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Search Results: l44649
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: How To Measure to Pick Out Correct Bearing Buddy for Boat Trailer
- Q&A: Do EZ Lube Spindles Keep Water Out When Submerged
- Q&A: Can Hub That Had Bearing Buddy Installed Be Used on Axle With EZ Lube Spindle
- Q&A: Recommended Bearing Buddies to Replace Old 1.981 Inch Bearing Buddies
- Q&A: Tips for Removing Zerk Fitting of EZ Lube Spindle to Install Bearing Buddy
- Q&A: Will Bearing Buddy Fit on Trailer Axle With EZ Lube Spindles
- Search Results: l68149
- Search Results: bearing buddies
- Search Results: akhd~545~35~ez~k
- Search Results: akhd~545~35
- Shop: Bearing Buddy Bearing Protectors - Model 1980-SS - Stainless Steel (Pair)
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Bearing Buddy Bearing Protectors - Model 1980 - Chrome Plated (Pair)
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Packing Trailer Bearing Demonstration
- Search Results: castle nut
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: CE Smith Trailer Fenders CE26098G-2 Review
- Video: CE Smith Trailer Fenders - No Step - CE17900G Review
- Video: Review of etrailer Trailer Fenders - No Step - HP97FR
- Search Results: castle nut and washer