Brake Assembly and Hub/Drum Recommendation to Fit Dexter Axle # 7359765
Question:
AKEBRK-35-SA Electric Trailer Brake Kit - Self-Adjusting - 10inch - Left and Right Hand Assemblies - 3,500 lbs - AKEBRK-35-SA 7359765 Dexter Trailer Axle Beam with E-Z Lube Spindles - 95inch Long - 3,500 lbs - 7359765 Total: $ will these brakes fit this axle?
asked by: Ron P
Expert Reply:
Yes, the 3,500 lb brake assemblies part # AKEBRK-35-SA that you referenced will fit the 3,500 lb Dexter axle part # 7359765 that you mentioned. They will bolt right up.
If you need hub/drums too the part # 84546UC3-EZ would fit and work well.
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer