Replacement Trailer 4-Way Recommendation for 4-Way with 6 Wires Ran to It
Question:
The end of my 4-flat connector got damaged on my 2-place pwc trailer so i need to replace it. There’s a total of 6 wires going into the 4 flat connector 2-brown, 2-white, 1-yellow, and one green. Can you direct me to the appropriate replacement part?
asked by: Ken
0
Expert Reply:
You'd need a wishbone style 4-way replacement like the Wesbar part # 002402 which you'd wire in color for color. The only wire you'd need to run down into a single wire is the white wire since you have a wishboned ground circuit as well as the Wesbar does not have that.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Wesbar Wishbone Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 18" Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Wesbar
more information >
Continue Researching
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Shop: Wesbar Wishbone Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 18" Long
- Shop: 4-Flat Connector Wishbone Style - Trailer End
- Article: Trailer Wiring Diagrams
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Q&A: Replacing The Entry Door Latch Kit On A 2000 Featherlite Trailer
- Q&A: Selecting The Roadmaster Tow Defender For a 2024 Jeep Wrangler With Blue Ox Tow Bar
- Q&A: How To Lift a Forest River R-Pod Trailer
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Welding Latch Pin Installation for Securing Trailer Ramp
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Article: Best Ladder Racks