Hub Compatible With CE Smith Trailer Axle Beam With EZ Lube Spindles
Question:
I just purchased a CE33201GA 1.8K # axle with easy lube spindleswhat hubs do I need? The old ones are 5 x 4 1/2inch for a standard spindle. Also, I will need nuts for this axlewhat size are they? Thanks,
asked by: Burr S
Expert Reply:
The correct hub assembly for CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles # CE33201GA is Idler Hub Assembly for 2,000-lb E-Z Lube Axles # AKIHUB-545-2-G-EZ-2K.
This hub assembly uses inner and outer bearing L44649 and has a 5 on 4-1/2" bolt pattern and comes with the necessry nuts for installation.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Article: 2023 Best Gifts for Auto Enthusiasts
- Article: Most Popular Wheel Bearings
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Axle Tube Diameter and Spring Seat Dimensions of etrailer Brand e84YR 2000 lb Capacity Axle
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Best Boat Trailer Jacks
- Q&A: Available Galvanized Axles For Boat Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub