How To Pick Out Replacement Axle for Trailer
Question:
Hey friends! I have a 1991 Coleman Chesapeake Pop Up. I believe my axle is bent. Can you offer a replacement option?
asked by: Elle
Expert Reply:
You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference.
You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well. You might have 58 inches between the center of the spring seats based on what you listed like the part # 20545I-EZ-72-10.
I also attached a link to a page with all of the axles we carry. You'll also need to know the capacity your trailer needs. With that info we can see what axle would work best and also what springs you'd need.
Since you are wanting to add an axle check out the help article I attached down below that covers this topic as well.
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What is Needed to Add Second Axle
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Radial Tire Recommendation for Malone MicroSport Kayak Trailer with 12" Wheel
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement 2,200-lb Axle Kit For A Small Utility Trailer
- Q&A: Can Wet Bolts be Used with Nylon Trailer Suspension Bushings
- Q&A: Is Leaf Spring Capacity Rating for One Side or Two
- Q&A: Do Dexter Axles With 86-1/2 Inch Hub Face Have 71-1/2 Inch Spring Centers
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?