Recommended White Slide-Topper for a 7 Foot Long and 13 Foot Long Slide-Out

Question:

One more question beforeI order. My camper has aluminum siding shoes the lot come with the correct screws? Ok two questions how many inches from the top flange should I put the bead strip?

asked by: Nate

Expert Reply:

Absolutely! For the 7' long slide-out you would want to use the Solera 7.5' Slider (Slide-Topper) in White part # LCV000163287 which fits a box width range of 80" to 85-3/4". For the 13' long slide-out you would want to use the Solera 13.5' Slider (Slide-Topper) in White part # LCV000163300 which fits a box width range of 152" to 157-3/4". The box width range is measured from the outside of each flange on the slide-out.

Both of these slide-toppers come with white fabric and hardware. They are made right here in the U.S.A. and have a one year warranty. I have attached a review video for you as well.

expert reply by: Conner L

Nate

6/7/2018

One more question beforeI order. My camper has aluminum siding shoes the lot come with the correct screws? Ok two questions how many inches from the top flange should I put the bead strip?

Conner L.

6/7/2018

Yes, the #10 x 3/4” screws that are included with either slide-topper will be sufficient for your aluminum siding so long as they are attached to a backer plate within the structure of the wall. The awning rail will need to be placed a minimum of 3" above the upper edge of the slide-out.