Longer Weight Distribution Shank to Tow with Tail Gate Down
Question:
I have an Equalizer hitch. My current shank is 12inch long but I dont have enough room to lower my tailgate. I would like to get one that is a little longer so my rv jack will be a little further from my truck. I need a 7inch drop. Also, I have a 2 1/2inch receiver but I have a 2inch sleeve I currently use. I would prefer a 2 1/2inch but can continue using my sleeve if necessary. Do you have a shank that fits my needs?
asked by: Rob B
Expert Reply:
We have a few options that may work for you. You didn't say exacty how much longer you need the shank to be and I don't think we have one that fits every piece of criteria you're looking for but here's some ideas that could fit:
Part # RP63971 is 14 inches long overall. The drop is only 6-1/2 inches and that's with a round bar weight distribution system. If you have a trunnion bar system it won't work because the drop is only 4-3/4 inches. It's also for 2 inch receivers so you'll still need your adapter sleeve.
Part # C17122 is 18 inches long overall. It's 14 inches from hitch pin hole to the adustment holes. It has more drop at 7-1/2 inches for a round bar system and 7 inches for a trunnion bar system. It's also for 2 inch receivers.
Part # 325-GH-1302 is a completely different animal but may be your best fit. It's a torsion shank that has rubber flex cords that eliminate shock. However, the drop is 7 inches, it's 13-5/8 inches from the furthest back hitch pin hole to the adjustment holes, and it fits a 2-1/2 inch receiver. It also includes a built-in tongue weight scale.
If none of these are long enough for you to lower your tailgate let me know how long you need it to be and I'll see if we have anything that can work for you.
Products Referenced in This Question
Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 7" Drop/Rise - 2,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 7 Inch Drop
- Round - 7 Inch Rise
- Gen-Y Hitch
more information >
Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 4 Inch Drop
- Pro Series
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Gen-Y Torsion Weight Distribution Shank be Used with Pro Series Weight Distribution
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Q&A: Recommended Sway Control Compatible With Aluminum Frame Car Hauler Trailer
- Q&A: Will a Pro Series Weight Distribution Shank # RP63971 Replace a RP54970
- Q&A: Weight Distribution System Shank 18 Inches Long
- Q&A: Can Patriot Hitches Adjustable Drop Hitch Receiver Be Used With Hitch Extender
- Q&A: Distance from Pin Hole Center to End of Bar on Reese Weight Distribution Shank RP63971
- Article: Overview of Lubricating Grease
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Hitches are Made in the USA
- Article: Most Popular Wheel Bearings