Timbren Axle Less System Recommendation that Can Fit 6 Lug Trailer Hubs
Question:
I have a trailer that was built in 1960, that has a straight axle with no suspension . I would like to put a independent suspension on it. I just put new tires, hub s and bearings on it. I dont want to change out the hubs and bearings.The wheels are a six lug pattern ,drum number is rvd-h-655. The bearing outer number is 15123. Do you have a spindle suspension kit for it?
asked by: Glen
Expert Reply:
Sounds like you have hubs like either the # 8-201-9UC3-EZ which is a hub/drum or the # AKIHUB-655-6-K which is an idler hub. Both hubs use the # 25580 inner and # 15123 outer bearing, which is compatible with the spindle used by the Timbren # ASR35HDS02 axle-less suspension that would give you an independent suspension setup.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Q&A: Lug Nut Covers for Monaco MH on Workhorse W22 chassis 22.5 Wheels
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Availability of 6k Trailer Hub with 6 Lug Bolt Pattern Pre-Greased
- Q&A: Replacement Dust Cap/Cover for DeeMax Idler Hub # DE96VR
- Q&A: Can I Replace 8-14.5 Tires with a Non-Metric Sized Tire
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing