How to Find Bearing and Seal Part Numbers for 1994 Airstream Triple-Axle Trailer
Question:
we have a 1994 airstream classic limited with 3 axles. I am looking for timken bearings, seals the whole lot. do you know if the one you have listed is the right size, i do not know if these parts are universal, and are they they made in the us or china, i have heard timken has both sources.
asked by: Monty
Expert Reply:
We offer RV hub bearings and grease seals in many sizes; all such parts are shown on the linked page. These are available in single-lip, double-lip and oil bath types. We usually recommend using double-lip seals whenever available since they will do a better job of keeping your hub grease in place without leaks.
The best way to find new bearings and seals is to pull one of your hubs to find the original items' part numbers. You can refer to the linked photo to see how these part numbers usually appear on such parts. Once you know the part numbers you can directly search our site.
We do not offer Timken brand products. Many of the bearing parts we offer are foreign-made.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Grease Seals 10-36 (pair)
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Video: etrailer Easy Grease Trailer Hub and Drum Assembly Installation - 2019 Grand Design Reflection 150 F
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Search Results: b12e~21
- Search Results: axletek~12~gg
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: Installing the Magnet Retainer Clip on a 10K Electric Brake
- Video: Bearing Repacking and Grease Seals Installation
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Search Results: magnet clips
- Video: etrailer Electric Left and Right Hand Assemblies Trailer Brake Kit Installation - 5th Wheel
- Video: etrailer Electric Trailer Brakes Installation on a 2017 Grand Design Reflection Fifth Wheel
- Shop: Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: Trailer Tires are Wearing On the Inside Tread with Low Miles on the Tires
- Q&A: How Thick Are Electric Brake Shoe Pads and When Should They be Replaced
- Q&A: Installing Castle Nut in Hub and Drum Assembly
- Q&A: What Causes a Brake Magnet To Fall Off After Removing the Hub
- Search Results: 2788
- Search Results: 22834 hub
- Search Results: airstream trailer brakes