How to Pick Out Replacement Hubs for a Boat Trailer
Question:
looking for replacement hub for 1995 starcraft 1221, if that helps
asked by: Paul C
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Rooftop Cargo Carriers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: RV and Camper Types, RV Classes
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Q&A: 10k Dexter Replacement Hub for a 8-415