Can the TorkLift PowerArmor Locking Battery Box # TLA7710R be Sealed
Question:
Hi, Aside from the entry/exit holes for wiring and the slots in the base of the box which can both likely be sealed fairly easily how water tight or resistant is the box otherwise? For example, does any water flow in between the lid and the box itself? Im considering one of the larger boxes for a battery or two leaving room for a DC-to-DC charger and possibly an inverter, neither of which is IP rated for water protection.
asked by: Don
Expert Reply:
TorkLift PowerArmor Locking Battery Box # TLA7710R, if used as a battery box, will have to have some ventilation which means that it isn't going to be completely waterproof. Battery boxes can't be sealed because lead acid, AGM, and Gel batteries produce a combustible gas. There are also some battery chargers that have a warning about using them with proper ventilation.
It will let water in and if you don't seal up the bottom it will let the water right back out again. If you mounted your DC to DC charger and inverter to the underside of the lid then they are much less likely to get wet at all let alone wet enough to damage them.
Or you might consider a different DC to DC charger like the Redarc BCDC charger # 331-BCDC1240D which is fully seal to protect against water, dust, and shock.
Products Referenced in This Question
Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 40 Amp
- Battery Charger
- Battery Charger
- RV/Camper
- Trailer
- 200 Ah
- Charges/Maintains
- 12V
- Solar Panels to Auxiliary Battery
- Vehicle Battery to Auxiliary Battery
- Redarc
more information >
Product Page this Question was Asked From
TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries - Diamond Plate Aluminum
- Battery Boxes
- Camper Battery Box
- Trailer Battery Box
- 6V Batteries
- 12V Batteries
- Locks
- 58-1/2L x 7-5/8W x 12-3/4D Inch
- Aluminum - Diamond Plate
- TorkLift
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum
- Shop: TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries - Diamond Plate Aluminum
- Shop: Stromberg Carlson RV Bunk Ladder - Aluminum - 60" Tall - 250 lbs - Black
- Video: Curt RV and Camper Hitch - Frame Mount Hitch - 13703 Review
- Shop: RV Jack Pads
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Video: TorkLift PowerArmor Locking Battery Box Review
- Shop: TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries - Diamond Plate Aluminum
- Video: Curt Adjustable Width RV Trailer Hitch Installation - 2017 Forest River Rockwood Mini Lite Travel Tr
- Q&A: Battery Box Recommendation for 3 Group 27 Batteries
- Q&A: How Does The Battery Secure In The TorkLift PowerArmor Locking Battery Box?
- Q&A: Is There a Battery Box Available that will fit 2 Batteries Measuring 13.7"x6.1"x10.6 Each
- Shop: Solar Power Kit for TorkLift PowerArmor Battery Box - 10 Watt Panel
- Video: Stromberg Carlson RV and Trailer Jack Pads Review
- Video: Review of Draw-Tite RV and Camper Hitch - Adjustable Frame Mount Hitch - 82201
- Shop: RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Steel - 2.6 Cu Ft - Black
- Q&A: Travel Trailer Hitch Receiver and Bike Rack Recommendations for Back of Trailer
- Q&A: How to Determine if Stromberg Carlson Hitch Will Fit 2020 Jayco Jay Flight Trailer
- Video: Review of TorkLift Battery Boxes - Trailer Battery Box - Camper Battery Box - TLA7700L
- Video: Blaylock Industries Wheel Chocks - Wheel Chock - EZ-JACK Review
- Q&A: Installation Methods for TorkLift PowerArmor Locking Battery Box
- Q&A: How Can You Mount The Commercial Grade Battery Box To An A-Frame With Battery Rails?
- Shop: Truck Bed Bike Rack
- Shop: Trailer Hitch
- Search Results: power armor battery box
- Search Results: locking battery box
- Article: Determining Trailer Tongue Weight
- Search Results: battery box