Changing Trailer Single-Wire Running Lights to Stop/Tail/Turn Lights
Question:
How can I convert a one wire running light to work with my signal lights and brake lights
asked by: Jimi
0
Expert Reply:
You need to replace the light with one that is a 3-function for stop, tail, and turn functions. The light needs another wire to connect to the stop and turn signal functions like part # ST31RB has. Since yours only has one wire it grounds through the mounting hardware. The turn and brake lights are on one circuit so you just need a light with one more wire to add that circuit.
expert reply by:
Charles S
0
Product Page this Question was Asked From
Optronics Trailer Tail Light - Weatherproof - Stop, Turn, Tail - Incandescent - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 4-9/16L x 2-1/2W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 15' Awning For Lippert Edge That Allows For Solera Screen/Family Room
- Article: 2 Steps for Hooking Up an External Propane Tank to Your RV
- Q&A: Replacement Trailer Wheel For SRW 31767A0 17.5 x 6.75 Inch Trailer Wheel
- Q&A: What Is the Proper Oil for Oil Bath Hubs on Trailer Axles?
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Trailer Tail Light for SAE Number AISTO1
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Difference Between Buying Electric Trailer Brake Kit Set Versus Buying Each Brake Individually
- Q&A: Does Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter # 37175 Use 10 Gauge Wire
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Couplers
- Article: Calculating Portable Generator Power Needs
- Article: Trailer Lighting Requirements