Fulton Jack Recommendation for Triton Dual Axle Boat Trailer with Weld On Fulton Jack

Question:

did see the answer, but Jameson said “send me pictures” and I have no email address for him. So, here they are. I will order what he recommended, but want to make sure it’ll be an easy swap out.

asked by: Alan B

Expert Reply:

Sounds like you'd need a Fulton jack like the part # FXP100W0301 which is a weld on style jack like what you have that would attach to a bracket like part # P9012-00 that you'd have installed on your trailer most likely.

You can send me pictures if you like and I'll take a look and see if there's something else that would work better. Sticking with a Fulton jack though will allow you to reuse the bracket you have installed instead of having to remove what you have and install a new one.

expert reply by: Jameson C

click to enlarge

Alan B.

5/9/2018

Jameson C.

5/9/2018

Thanks for the pictures! Based on that it's pretty easy to see that the correct jack you need is the # FTJ120W0301 which uses the same mounting bracket you have. This will bolt right up using the snap ring that's included.