Which Wire of Trailer Brake Magnet is Power and Which is Ground
Question:
I have black and white wires coming from the brakes on my trailer, do both wires plug into the EB pin on my connector?
asked by: Nick S
0
Expert Reply:
So trailer brake magnets are not polarity sensitive which means that either wire can be used as the power or ground circuit. So basically you just would need to pick whichever you wanted to be the power wire and then ground the other and you'll be set. Typically white is ground on trailer wiring and black is 12 volt power.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight