What are the Dimensions of the Replacement T-Bolt for Thule Roof Rack Gutter Feet

Question

Question:

We just got a new CTS with factory side rails and crossbars. We can mount our bicycle and tandem directly to it by sliding T bolts in the slots under the rubber strip on top. Id prefer touse slighly larger T bolts for the tandem. What size are these, and/or do you have larger. I got four from the tech at Rack Attack in Denver, and I assume they are your T bolts, not sure? Thanks in advanceove your stuff Thule

asked by: Ed B

0

Expert Reply:

I went out to the warehouse and pulled the # 853-0782 that you have referenced. The head is 0.7 inches square and 0.19 inches tall. The overall length is 2.21 inches, the threaded part makes up 2 inches of that. It has a diameter of 0.31 inches (8 millimeters). There is not a larger.

Depending on the bike racks you are using there may be other options for you.

expert reply by: Michael H

0

Answer 1

The brackets on the Thule Hullavator 897 and the Thule Hullavator 897XT are not the same. The first generation Hullavator was designed to only work with Thule square bars, so it will not work with your Thule WingBar Evo. The updated model, 897XT, was…

view full answer...

Answer 2

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 3

I pulled this from our warehouse and it was a lot smaller than I originally thought. In the attached picture I have all of the dimensions you requested noted. To give you a quick overview of the dimensions: Thickness - .16 inches Long Sides - .993…

view full answer...

Answer 4

The Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item #TH43002XT-782EX is compatible with some of the Bakflip tonneau covers like the Revolver X4s item #BAK62VR. This system mounts to the stake pockets so as long as your cover leaves…

view full answer...

Answer 5

There aren't as many custom fit flat towing wiring harnesses for vehicles like there is for trailer wiring so what that means is that for your 2023 Ford Maverick there are only kits that require wiring like the Roadmaster diode kit part…

view full answer...

Answer 6

Malone AirFlow roof racks like #MPG215 can use their own T-Slot Fit Kit #MPG8287 for Malone carriers or you can use another T-bolt fastener. I linked a photo showing a cross section of the AirFlow bar and the exact inside dimensions. I converted the…

view full answer...

Answer 7

Yep, the Thule cargo basket will absolutely fit the aero crossbars of the Malone roof rack you asked about; the correct part numbers for both are the following: - Thule Canyon XT Roof Cargo Basket #TH859XT - Malone AirFlow2 Roof Rack #MPG215 The only…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

I consulted with my contact at Thule, and he informed me that the fit of the Thule WingBar Evo #TH711400 and the older Hullavator 897XT has not been confirmed to fit due to the style of the new bars. However, my contact did say that the Thule…

view full answer...

Answer 10

We do not have any photos or visuals on how the Replacement Aeroblade Shim for Thule Hullavator Kayak Carrier, part #TH56JV, attaches, but I can explain it for you. The curved portion is meant to attach upward into the bottom of your older Hullavator…

view full answer...

Answer 11

It looks like you have the Thule Aeroblade bar. The T-slot dimensions are 1/2 inch wide for the top of the opening and 3/4 inch wide at the bottom. The T-slot is 1/8" inch tall.

view full answer...

What are the Dimensions of the Replacement T-Bolt for Thule Roof Rack Gutter Feet

Product Page this Question was Asked From

Continue Researching