Replacement 250-031468 Seals Needed for Reliable Oil Bath
Question:
I am planning on replacing the seals on my oil bath hubs. Do I need to use a sealant on the new seal? In addition I have small allen head screw that fits in the refill hole. Does that also need a sealant placed on it before putting it back in? Hub: Reliable Oil Bath Seal: part 250-031468 Thank you
asked by: Jon G
Expert Reply:
From my research it looks like the correct replacement seal for your Reliable oil bath kit is the Replacement Seal # XLPROLUBE1980SEAL which is used for 3,500 lb axles. This seal has a 1.72" inner diameter and a 2.56" outside diameter. You can use these specs to ensure that it fits your application.
I am unsure about the screw you mentioned because none of our kits have that screw, they just use rubber plugs similar to what you would see on an EZ Lube grease cap. If you are needing to replace the whole oil bath assembly you can use the Kodiak XL ProLube Kit # XLPROLUBE1980KIT which includes the seal that I mentioned above.
Products Referenced in This Question
Kodiak XL ProLube Kit for 3500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 1.98 Inch
- Kodiak
more information >
Product Page this Question was Asked From
Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Seals and Gaskets
- Kodiak
more information >
Continue Researching
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 48-1/2" Axle Spacing
- Shop: Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector
- Search Results: gcp1
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Search Results: rm~523182~5
- Search Results: kdbc225dac
- Search Results: brake hoses
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Q&A: Replacement Shock Absorber
- Search Results: electric jack
- Search Results: gcpn~25008
- Search Results: kr1110q
- Q&A: Replacement Disc Brakes For a DHM Boat Trailer With 2,860LB Axle Rating and 14" Diameter Wheels
- Video: Kodiak Disc Brake Kit Installation K2HR79E
- Shop: Brake Controller
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: How to Charge a Dump Trailer Battery
- Video: Review of Kodiak Trailer Brakes - Replacement Caliper Bracket - KOD94FR
- Video: Review of Kodiak Trailer Brakes - 10 Inch Hub and Rotor Disc Brakes - KOD67FR
- Q&A: Will Dexter 8-248 Dexter Hub Replace Reliable R1001 Hub
- Video: Kodiak Trailer Brakes KDBC225DAC Review
- Video: Review of Kodiak Trailer Brakes - 10 Inch Hub/Rotor Dacromet E-Z Lube Disc Brakes - KOD59FR
- Q&A: Bleeding Trailer Brakes After Installing Kodiak 225 Disc Brake Calipers
- Video: Kodiak Trailer Hubs and Drums - Hub - KH84545S Review