Suspension Enhancements for 2013 Thor Challenger Built on Ford 22-Series Chassis

Question:

on my 2013 thor challenger , in want to install front anti sway bars,, our unit seams to sway on curves, and most any turn more than , if feel , it should. my main concern is that right now there seams to be a slight tilt to the front of our unit. even stopped,parked on level ground it has a very slight tilt, [ driver side appears to be closer to the ground than the other side.]. my question is will installing the roadmaster anti sway bar correct this tilt ?

asked by: Paul N

Expert Reply:

If your 2013 Thor Challenger, built on a Ford 22-Series V-10 chassis, has a noticeable tilt to the driver's side even when parked on level ground this might simply be due to the weight of the slide-out assemblies. We have heard of this issue before.

You can have the coach suspension checked out by a qualified technician and you might also want to confirm that your loading of the coach is not also responsible for the tilt. Thor can probably offer you some help on this point; I suggest contacting them with your coach VIN so that can look up all the equipment in it.

Once you know nothing is wrong with the coach then by all means you can improve its handling by installing front and rear anti-sway bars. For a front bar use Roadmaster kit # RM-1139-148; for the rear anti-sway bar use kit # RM-1139-149. These products are all suited to the coach's 22K gross weight.

expert reply by: Adam R