Dimensions of Timbren Heavy Duty Axle-Less Suspension System # ASR2KHDS01
Question:
Hello, I'm currently working with a project at Stanford University. We are building a trailer and we are interested in your trailer suspension 2000lbs Axle-Less Trailer Suspension by Timbren. My question is what is the dimensions for the holes and the bolt circle for mounting on wheel bearings to the shaft? are there any types you know is bolt on? Best regard
asked by: Daniel L
Expert Reply:
The Timbren Heavy-Duty Axle-Less Trailer Suspension - 2,000 lbs # ASR2KHDS01 is an excellent system that bolts directly to the trailer frame. This removes the need for spring hangers, leaf springs, and even a thru-axle. It does require a 2 inch square bar (not included) that will span from assembly to assembly using the integrated holes.
This assembly has spindles that are 1.063 inches diameter at the outer bearing and 1.378 inches at the inner bearing and 1.719 inches at the seal. This assembly has the brake mounting flange if you choose to add brake assemblies like # AKEBRK-35-SA. If you use brakes, the hub assembly you want is # 84546UC3-EZ. If you do not use brakes, then you will want idler hub assembly # AKHD-545-35-EZ-K.
Everything in all these assemblies is a simple bolt on installation. I've attached an article to assist with axle positioning.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will Roof Rails Work On a Teardrop Trailer T@B
- Q&A: Can 10" Electric Brakes go on 2,200 lb Axle
- Q&A: Running Lights on Trailer Stay On All the Time
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Does Westlake ST235/75R15 Radial Tire & Wheel Come Balanced
- Q&A: Bolt Hole Spacing on the Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS02
- Q&A: Maximum Compression of Timbren Axle-Less Suspension System # A20RS545 Under Load
- Article: Trailer Tire Sizing
- Article: Pintle-Hitches
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Hyk Outdoors Teardrop Campers: Happy Camping Without the Hassle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: My Trailer Hitch Doesn't Fit