How to Pick Out Replacement Hubs and Brake Assemblies for Load Rite Boat Trailer

Question:

Good Day, I have a LOADRITE Boat Trailer, model number 22T4700TSA2. I am looking for replacement inner and outer bearings, the rear seal and the races that go inside. Also looking to see if you have the replacement hub, my trailer has 4 hubs and all 4 have brakes.....not drum but disc. Also looking for replacement brake pads. I understand that if i buy the hub it will have all of the guts already to go? Thank you in advance.

asked by: Scott

Expert Reply:

If we can get you set up with the correct hubs they'll have all the needed seals, races, and bearings. And once we know what hubs you need we'll be able to pick out the correct brake assemblies.

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C