Using a Truck Bed Cap Lock with Factory Electric Tailgate Lock

Question:

I have a 2017 f250 with electric locking tailgate and a new Swiss cap with 2 t-handle latches. Do you offer a electric latch system for the cap that will work off of the electric locking tailgate ?

asked by: Tim

Expert Reply:

For your 2017 Ford F-250 and Swiss Truck Bed Cap, I recommend taking a look at the Pop & Lock Power Locking Handle for Truck Caps part # PAL9555. You will need one system for each t-handle on your truck bed cap. They will actually replace the handles themselves as long as the opening for them is 1-1/8" in diameter.

In regards to wiring them in-line with the factory tailgate lock, you will want to splice the signal wire from each kit into the factory tailgate unlock signal wire. Pop & Lock stated that they have not yet tested this so a write-up and guarantee would not be available. However, I am fairly confident that it should work for you as it will be no different than their standard tailgate locks ability to splice into the door lock signal wire.

expert reply by: Conner L