Distance from Center of Pin Hole to Center of Ball Hole on Shank in Equal-I-Zer Weight Distribution
Question:
What is the dimension measured horizontally - in line with receiver from the center of the Ball hole to the center of the mount pin hole?
asked by: Galen
1
Helpful Expert Reply:
On an Equal-I-zer weight distribution system such as # EQ37100ET the pin hole to ball hole measurement can vary slightly depending on the angle of the head. But generally it is approximately 13 inches center to center.
expert reply by:
Michael H
1
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Is There an Axle Flip Kit For The 2023 Northern Spirit 2145RBX Travel Trailer?
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best Equal-i-Zer Weight Distribution Hitch For 850 lb Tongue Weight
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Does the B and W Continuum Weight Distribution System Have Sway Control
- Q&A: Best Weight Distribution Hitch System For a ATC Trailer With 2" X 8" Tall Frame Rails
- Q&A: Difference Between Fastway E2 and Equalizer Weight Distribution System