Can Timbren Silent Ride be Installed on an I-Beam Trailer Frame
Question:
This kit is what I need but where it mount to the trailer won’t work on mine. I got an I-beam style trailer that is aluminum, do y’all make a kit for mounting on I-beam trailers
asked by: Lee H
Expert Reply:
In order to use Timbren Silent Ride Suspension # TSR2000S06 with an I-beam frame the frame would have to be boxed where the Silent Ride would install. To do that a professional welder would have to weld on aluminum blocks to box the frame. There isn't a kit designed for I-beam frames. Installation requires a 2" x 2" hollow steel crossmember with 1/8" wall thickness. If you can achieve that then you can use the Silent Ride.
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 2,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Square Axle - 2 Inch
- Single Axle
- Timbren
more information >
Continue Researching
- Q&A: Recommended Wedge for a Turning Point Pin Box and a Curt Crosswing 5th Wheel Hitch
- Q&A: Reese Goose Box Recommendation to Replace MORryde Pin Box SPB72-1621LD
- Q&A: Recommended Axle for Replacing Odd Torsion Axle on 1940's Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: TracRac End Cap and Screw Replacement for TracRac Sliding Rack Crossbar
- Q&A: Replacement TracRac SR Ladder Rack Crossbar
- Q&A: Replacement Crossbar for TracRac Cantilever Extension
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: Where to Position the Trailer Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs