What is Typical Trailer Leaf Spring Deflection
Question:
thank you for the help, One more question: I'm mounting to an existing trailer that already has the fender attached how far from the center line of the fender should i mount the front bracket such that the tire will end up more or less in the center of the fender when compressed
asked by: Chad
0
Expert Reply:
Typical spring deflection for trailer leaf springs like the part # e54SR is right at 1-1/2 inches when at capacity.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: 3500 lb axle and spring kits
- Article: Double-Eye Trailer Suspension System Review
- Shop: Suspension Enhancement
- Search Results: timbren
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/8" - Dacromet
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Search Results: shackle strap
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Search Results: aps1
- Shop: Trailer Hitch
- Search Results: aps5
- Search Results: 30~20
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: Orientation of Rear Hanger Installation on a Trailer with Double Eye Leaf Spring Suspension
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: Spring Hanger Dimension Recommendations for Installing a e34SR Leaf Spring
- Q&A: Outer Diameter of Bushing on Suspension Hanger Part # 30-20
- Search Results: shackle
- Article: Where to Position the Trailer Axle?
- Video: Bulldog Trailer Jack - Side Frame Mount Jack - BD151401 Review
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM15945
- Video: Bulldog Trailer Jack BDP2052000 Review
- Video: Review of Demco Straight Tongue Trailer Coupler - EZ Latch Standard Coupler - DM15629-97
- Video: Command LED Trailer Tail Light Installation
Chad
4/5/2018
thank you for the help, One more question: I'm mounting to an existing trailer that already has the fender attached how far from the center line of the fender should i mount the front bracket such that the tire will end up more or less in the center of the fender when compressed