Which Wire is the Ground Wire on Optronics Trailer Light # MCL19CRB
Question:
description says one of the two wires coming out of the light is a ground wire, both are yellow. how do I tell which wire is the ground wire? Thanks
asked by: John
0
Expert Reply:
On the Optronics Trailer Light, part # MCL19CRB, you can use either wire for the ground. As long as one is wired to power and the other to ground the light will work.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Miro-Flex LED Clearance or Side Maker Light w/ Chrome Bezel - Submersible - 4 Diodes - Clear Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 5-3/4L x 1-9/16W Inch
- Amber
- Optronics
more information >
Continue Researching
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Article: Trailer Tire Sizing
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: How to Choose the Right Trailer Hitch Class
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Article: Best Camper Jacks
- Article: Brake Controller Installation: Starting from Scratch