Dimensions for Hickory Springs Manual Pull-Out Steps # 98224EXTALC1

Question:

Hello, Can you please provide dimensions for this step? Most of the other ones on your website show the dimensions on a couple of pictures but not this one. I would also like to know the dimensions from top to bottom in the fully opened position along with bolt to bolt and total width side to side. I’m hoping these ones will provide a bit more height compared to my existing ones which limit my options due to the mounting bolts being 27” bolt to bolt and current steps being 25 1/2” side to side with attached brackets on each side connecting to the overhead bolts. Thanks

asked by: Gilbert

Expert Reply:

The Hickory Springs Manual Pull-Out Steps # 98224EXTALC1 referenced in your question feature a distance of 14.74 inches from the top of the mounting brackets to the bottom of the assembly when fully open. The mounting base has an overall width of 27.50 inches with a 9 inch drop/rise between the steps.

I have attached an image with these and other dimensions labeled for this particular assembly that you can check out as well. You can also use Outriggers like # LC301704 to install new brackets that will fit with the step.

expert reply by: Chris R