Wire Functions for Trailer Tail Light - Stop, Tail, Turn STL72RB
Question:
I would like to use this light as a replacement on my Kubota RTV1100. The kubota has four wire in the harness. Drivers sie: yellow/black yellow/purple black green Passengers side: yellow/black red/white black green any idea how i would wire this light?
asked by: Tom
Expert Reply:
The first thing to do is figure out the functions of the wires on your Kubota. Using a circuit tester such as # PTW2993 or a meter if you have one you can test each wire while someone operates the various light functions.
On light # STL72RB you would use pigtail # A45PB. On it the white wire is ground, the black wire is for tail/running lights, and the red wire is for combined turn signal and brake lights. Once you know the functions of the wires on your lights you can match them up to the wires described above.
If your existing lights have another function (reverse lights) or has separate turn signals from the brake lights then these lights will not work. We do have a similar light with reverse # STL211RB and you would need to use 2 of the pigtails for every 1 of these lights.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail/Backup
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-7/16L x 2-5/16W Inch
- Red and White
- Optronics
more information >
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Wire a 6 Pole Round Trailer End Plug
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Flat Towing Package for 2008-2011 Honda CR-V