Replacement 4-Way Recommendation for 2006 Blizzard Trailer
Question:
Hello there. I am ashamed to say I cannot find where the 4 prong end wire that hangs near the tongue connects to the rear harness that connects to all of the lights on this trailer. The end wire is damaged and I need to replace it. The wire itself dissapears into the frame. IS there some little door somewhere on the frame where the front and rear harness connects?
asked by: Ron
0
Expert Reply:
If you need to replace the 4-way of your trailer you wouldn't have to track down where the harness runs. Easiest way would be to cut off the 4-way and wire in the new one. For that we have the part # A35W42B.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 31 Feet and Longer
- Plug and Lead
- 4 Flat
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Converting 7-Way Blade To 4-Way Flat On Trailer
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work