bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Trailer Hub and Drum Recommendation for Replacing Hub with Bearings 25580, LM67048  

Question:

Wanting to put a standard hub with electric brakes on axle, these are old trailer house axles. Would like to use a 5 on 4.5 bolt pattern. Info I have is the inner bearing #25580, outer bearing LM62048 or LM67048, the second number is wore off a bit. The inner measurement on the seal is 2 1/4, cannot find a number on this. The break mount on the axle is a 4 bolt pattern not 5. Is this possible? Thank you

0

Expert Reply:

Actually the bearing info you listed indicates you have a very standard number 42 spindle which we have plenty of fits for. Only issue is that you'd need to go with a 6 on 5-1/2 bolt pattern. So for that you'd want the part # 8-201-5 with the bearing kit # BK3-300 and grease cap # RG04-060.

Then for brake assemblies part # AKEBRK-7-SA which is a kit for both sides of the axle.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-5 Review
Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-5 Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>