Ladder Rack Rated for 1,000 Pounds for a 1991 Ford F-250

Question

Question:

I have a 1991 Ford F250 and I would like a 1000 pound capacity rack that will accommodate a canopy as well. Do you have such an animal for sale and HOW MUCH? And where can I pick it up . . . or, how much is the freight?

asked by: RISH

0

Expert Reply:

The first thing you should know is that if you want to use a truck bed camper shell/topper/canopy then the ladder rack will have to be removed. There are no ladder racks that will accommodate a camper shell.

For 1,000 pound capacity ladder racks we have a few options:

# TH37002XT
# TH37002XT-EX (comes with over-cab extension)
# TH91000

Current pricing is available on the product pages. These items qualify for free shipping.

expert reply by: Michael H

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 3

The Retractable Ratchet Straps for Thule TracRac Truck Bed Ladder Racks #CBTH12 have a corrosion resistant steel body and a stainless steel spring. However, if you plan to leave them outside all of the time exposed to the elements I would expect the…

view full answer...

Answer 4

Of your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender #Y01149. If you're not concerned with the looks go with the Malone Axis #MPG907. It has more…

view full answer...

Answer 5

Anytime the fully loaded and ready to tow trailer weight is greater than 50 percent of the weight of the tow vehicle, using weight distribution should be considered. When you get the pop-up, hitch it to the vehicle and pay special attention to the…

view full answer...

Answer 6

Yes, it will! The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack item #311-CR4008 will work with your 2024 Ford F-250 so long as you have one of the following tonneau covers to attach it to Pace Edwards Bedlocker, JackRabbit, and Full Metal…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

The Base Rails #TH21785 are the correct base rails for your 2022 Ford F-250 Short Bed. The Base Rails #TH21510 fit the 1999-2016 Ford F-250 Short Bed. The new Base Rails #TH21785 are designed to fit the Thule TracRac SR Sliding Truck Bed Ladder Rack…

view full answer...

Answer 9

The best sliding ladder rack we offer for a 2018 Toyota Tundra that will work with an existing tonneau cover (assuming it mounts inside the bed) is the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-610 for models with 6-1/2' bed…

view full answer...

Answer 10

I reached out to my contact at TracRac and the Sliding Rack #TH43002XT-783 has not been confirmed to fit on a 5 foot bed, so even though there is a very good chance it would work with the minor modifications you mentioned, it would void the…

view full answer...

Answer 11

I have a solution for you. Unfortunately, since the Rola Haul-Your-Might T3 #59799 clamps onto the bed rails of your 2018 Nissan Titan's 5-1/2 foot bed with the utili-tracks system, you will not be able to use it with a tonneau cover. However,…

view full answer...

Ladder Rack Rated for 1,000 Pounds for a 1991 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching