What is the Diameter of Replacement Head Mounting Pin, # 6020PIN
Question:
What size is this Hitch Pin? I currently have a Reese 18k Fifth Wheel Hitch that has 1/2 Pins and need 9/16 Pins to eliminate the leg movement on the rails. Thanks for the reply
asked by: Jim T
Expert Reply:
I went out to the warehouse and measured a Replacement Head Mounting Pin, # 6020PIN. It has a 1/2 inch diameter. All of the pins that are designed for this application that I found had a 1/2 inch diameter. If you are getting excessive movement, this could indicated that the holes on the hitch legs and/or on the rails are worn out and the rails and/or legs should be replaced.
If the hitch and rails are not from the same manufacturer, there could be a compatibility issue.
Product Page this Question was Asked From
Replacement Head Mounting Pin for Reese 5th Wheel
- Accessories and Parts
- Fifth Wheel Hitch
- Pins and Clips
- Head Assembly Hardware
- Reese
more information >
Continue Researching
- Q&A: Do The Reese Rails RP58058 and Curt Rail C16204 Both Fit Same Fifth Wheel Hitches
- Q&A: Are Curt Adapter Rails For Ram Puck System Compatible With Reese 5th Wheel Hitch
- Article: Trailer Lighting Requirements
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: Slider Base for Reese 5th Wheel Trailer Hitch 30046
- Q&A: Difference Between The C16022 And C29BR Fifth Wheel Adapters
- Q&A: Replacement Electric Motor for the Atwood Motor # 75722
- Q&A: Why Aren't Adjustable Ball Mounts Made for 1-1/4 inch Trailer Hitch
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Trailer Hitch Receiver Sizes
- Article: Ram Trailer Tow Prep Package