Troubleshooting Weak Brakes on 2008 Everest After Having Bearings Repacked
Question:
So what auto adjusting brakes do I order?
asked by: Jim N
Expert Reply:
Either they somehow got grease on your brakes and they aren't working because of that or the brakes are way out of adjustment. Are the brakes manual adjust or self -adjust? If they are self adjust they should start working again after a several brake applications while moving.
If they are manual adjust you'd want to click the star wheel of the assemblies until you feel a light drag as you turn the wheel by hand.
Either way though I'd recommend speaking with the shop you had work on the trailer.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Harvest Hosts
- Article: What To Look For When Buying Ratchet Straps
- Article: Where to Position the Trailer Axle?
- Article: Must Have RV Accessories that Will Make or Break Your Trip
Jim N.
3/2/2018
Will send some pictures that I hope will help. The backing plate is held on with 5 bolts bottom 2 are3" on center middle 4" on center. Measuring across backing plate 15 1/4" on outside best I can measure drum is13"on outside and 3" deep on the outside. Didn't find any numbets on backing plate. Hope this helps