Ladder Rack Needed That Doesnt Bolt to Bed Rails on a 2015 Tundra Crewmax Pro

Question

Question:

I have a 2015 Tundra Crewmax Pro and I would like a ladder rack that will not interfere with my bed enclosure and not bolt to the metal finish atop of my bed frame. If there is a way to clamp to the inside metal loop brackets I am all ears.

asked by: SCOT C

0

Expert Reply:

I was able to find that your 2015 Tundra Crewmax Pro has the 5-1/2 foot bed and comes standard with the Deck Rail System. We do have some options that are compatible with the short bed and Deck Rail System which I have linked for you to check out.

Since you are looking for a system that does not install through the top of your bed rails I recommend going with the Rola Haul-Your-Might T3 # 59799. Although the brackets will sit on top of your bed frame as you can see from the attached picture they will clamp on the overhang of the bed rail, not the top of the bed rail.

The no-drill installation, aluminum crossbars with T-slots, and 800 lbs weight capacity make the Haul-Your-Might T3 one of the best ladder racks out there. This rack also comes with a 5-year limited warranty for peace of mind.

I have attached a review video for you to check out as well.

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes, since your 2016 Nissan Titan XD Platinum Reserve has the utili tracks the Rola Haul Your Might part #59799 that you referenced will fit and work well. The tool boxes you have would not interfere with the ladder rack from attaching. If you check…

view full answer...

Answer 2

If you check out the picture I attached you will see how the clamps of the TracRac TracONE part #TH27000XTB-TA install with the deck rail system of a 2015 Toyota Tacoma. The deck rail system is basically a track that runs around the truck bed. The…

view full answer...

Answer 3

We do have a mount kit designed for the Thule TracONE ladder racks and your 2019 Toyota Tacoma with the part #THXK4B. The ladder rack part number for your truck that includes the mount kit and the uprights we have the part #TH27000XTB-XK4B.

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

We only have the products listed on our website. I just double-checked to see if there was anything matching your descripton. The 4 microwave/convection/OTR ovens are all well over your 24" wide location. One of the smallest is the Furrion…

view full answer...

Answer 7

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…

view full answer...

Answer 12

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Ladder Rack Needed That Doesnt Bolt to Bed Rails on a 2015 Tundra Crewmax Pro

Featured Help Information

Miscellaneous Media

Continue Researching