Replacing Bearings and Seals on EZ Loader Boat Trailer for Grease Versus Oil Bath

Question:

I have a StarCraft 16 foot boat, and EZ Loader Boat Trailer. EZ Loader Model: STC90B 15-16 2100 This trailer has Wet Oil Bath Bearings instead of the normal Grease able units. Want to re-do all this running gear before I take this boat out this spring. Bearings, Seals, Whole 9 Yards. Can you help with getting this Kitted Part Number please? Thanks for the assist

asked by: Patrick C

Helpful Expert Reply:

I can help you get the bearings and seal you need, but I need some information from you on your bearings. You will need to pull one of your hubs and look at the bearing number on the face of the inner and the outer bearing of your hub as well as the number on your seal. If you cannot find these numbers on the face of each bearing and the seal, then you will need to measure the axle spindle with a digital caliper in a couple locations to assist. I've attached an article and a photo to help.

When I have the spindle measurements or the bearing numbers, I can help you with the parts you need to replace your oil baths with grease.

expert reply by: Jason S