Determining Correct Kodiak Disc Brake Kit to Replace Brakes on Boat Trailer
Question:
I want to change my boat trailer brakes over to Kodiak brakes. My tralier has UFP axles PART#36132. I want to know what Kodiak kit i need to replace the brakes on two of the axles as the trailer has three axles.
asked by: Adam
Expert Reply:
We have a large selection of Kodiak disc brake assemblies available that you can look through. The kit that will work to replace the existing brakes on your trailer will depend on the axle capacity, bolt pattern and the inner and outer bearing numbers. I was unable to find any information regarding the model 36132 axle that you mentioned.
After locating the axle capacity and measuring your bolt pattern (for which I have attached a helpful article that explains this process), I recommend pulling the existing hub/rotors to check for the bearing information. The numbers should be stamped onto the bearings themselves.
For example, the Kodiak Disc Brake Kit # K2HR35D features 10 inch rotor diameter assemblies and are designed for 3,500 pound axles. They have a 5 on 4-1/2 inch bolt pattern, use the # L68149 inner bearing and # L44649 outer bearing. It fits 13 inch and larger wheels.
I have attached a short video demonstration on this kit, along with a link that will take you to our available selection of Kodiak disc brakes that you can look through. You can filter through the different sizes, bolt patterns, and capacities by using the facets on the left side of the page.
![Chris R](https://images.etrailer.com/static/images/catg/people/1101_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will 3,500 lb Kodiak Disc Brake Kit Fit 2012 EZ Loader Boat Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: What Trailer Tire Size is Most Similar in Diameter to 7-14.5 for Trailer
- Q&A: Recommendation for Replacing Torsion Axle on Ez Loader Boat Trailer
- Q&A: Why Were The Kodiak 204 Calipers and Pads Discontinued?
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)