Measurements for Reese Pole Tongue Adapter # RP58393
Question:
What are the width dimensions at the widest and narrowest point of the adapter? Also what is the height of the part where the sway control brackets bolt to?
asked by: Brad
0
Expert Reply:
I spoke with my contact at Reese about pole tongue adapter # RP58393 and got some measurements for you. At the front it is 18.75 inches wide overall. At the back it is 22.98 inches wide overall. The frame height where the weight distribution brackets go is 5 inches tall. And front to back it is 7-1/2 inches long.
expert reply by:
Michael H
0
click to enlarge
Product Page this Question was Asked From
Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Weight Distribution Hitch Towing A 1978 Seacamper Houseboat
- Q&A: Replacement Bearing With 1.75 Inch Inner Diameter
- Q&A: Recommended Hitch Extender for a 3 Inch Hitch Receiver
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Equal-I-zer Weight Distribution Hitch for Ice Castle Fish House Trailer
- Article: Determining Trailer Tongue Weight
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Install a Weight Distribution System on a Straight Tongue Boat Trailer
- Q&A: Fit and Compatibility of Weight Distribution System Chain Lift Brackets
- Article: Best Boat Trailer Tires
- Article: Which Sway Control Hitch is Right For Your Trailer?