Is there a Trailer Hitch for a 2018 Chevy Equinox that Fits in the Same Place as the Factory Hitch
Question:
The Hitches you show are all mounted below the rear fascia. Original GM shows it to be raised HIGHER up and mounted WITHIN the Fascia. Do you have this style?
asked by: Roy
Expert Reply:
No, in this case the aftermarket hitches for the 2018 Chevy Equinox do not mirror the location of the factory hitch. Like you said the receiver on all the available options is below the rear fascia. The benefit though of an aftermarket hitch is that the hitch itself will be less than half the MSRP on the factory hitch and that does not include labor to have it installed if you choose to have the dealer install it. And the draw-back of the aftermarket hitches is limited ground clearance.
If you do go with an aftermarket hitch the most popular is Draw-Tite hitch # 76419. With this hitch only the receiver will be visible. I have linked a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring you can use # 118750 if your Equinox is NOT a Premier model. If it is a Premier model use # 118759. These wiring harnesses will provide a 4-Way flat connector at the rear of the vehicle.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >