Reese Trunnion Bar Weight Distribution System for Trailers Up to 15,000 lbs
Question:
Etrailer made a video, logged on YouTube 09/18/08, of a Pro Series weight distribution hitch. I have one of those and trying to find the part number for the hitch. Its a 14000lb hitch. Im sorry to bother you. Thanks.
asked by: Rodney
Helpful Expert Reply:
The weight distribution system referenced in the video is the Pro Series SC Weight Distribution part number 49579 which has since been discontinued. This weight distribution system was rated for 14,000 lbs. gross trailer weight (GTW) and between 600 and 1,100 lbs. of tongue weight (TW).
For a similar weight distribution system by Reese that is rated for 15,000 lbs. GTW and between 800 and 1,500 lbs. of TW, I recommend using the Reese Weight Distribution System part # RP66131. You will also need a shank like part # RP54970 and ball mount like part # 63840 in order for this system to work for you. I have attached a review video of the Reese system for you to check out as well.
When choosing a weight distribution system, you will want your total tongue weight to fall in the middle of the weight distributions weight capacity. For example, the ideal weight distribution system for a total tongue weight of 600 lbs. is one that is rated for 400-800 lbs. of tongue weight. In order to be sure you are choosing the correct weight distribution system, you will want to find the total tongue weight (TTW) of your towing setup by adding the tongue weight of both your loaded ready to tow trailer and any cargo stored behind the rear axle of the tow vehicle.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Dome for Fan-Tastic Vent Model 6000A or 6000BTA
- Q&A: What is Max Drop with Curt Short Arm Weight Distribution System
- Q&A: Recommended 4 Inch Spacer For The Airlift 5000 Ultimate Helper Springs # AL88388
- Q&A: Pro Series Snap Up Handle Associated with part # 113913
- Q&A: Should Towing Setup with Weight Distribution go to Weigh Station to Verify Setup
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Tips on How To Tow a Trailer
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride