What Size Padlock Can be Used with the Curt Cargo Bag # C18210

Question

Question:

what size padlock would you use to lock the zippers together?

asked by: Jerry

0

Expert Reply:

If you check out the attached review video of the Curt Cargo Bag # C18210 (about the 2:00 mark) our video team member already measured the zippers to have a hole that is about 3/8" diameter so you will just need a padlock with a shackle diameter smaller than 3/8" to use with the bag.

The Master Lock Brass Padlock - 1-1/2" Wide - Long Shackle # ML4140LH has a shackle diameter of 1/4" so it should work just great for your application. If you would like a smaller diameter shackle then I recommend the Master Lock Covered, Solid Body Padlock # 131D with a 3/16" diameter shackle instead.

expert reply by: Jon G

0

Answer 1

The Curt hitch-mount cargo carrier #C18109 measures 59-7/8 long x 19-1/8 wide on the inside of its side rails so with it you can use a cargo bag like the Curt waterproof bag #C18210 or the similar but slightly larger 15-cubic-foot bag #C18211. Since…

view full answer...

Answer 2

The Curt Cargo Bag for Hitch Mounted Cargo Carrier - Waterproof - 12.25 Cu Ft #C18210 has dimensions of 56 inches long x 18 wide x 21 tall. With a carrier only 17 deep, this bag will technically be too wide, however it is a bag so it is flexible…

view full answer...

Answer 3

Tie-down straps can certainly be added to the Curt Cargo Bag #C18210 that you referenced for even more security but one of the great things about this particular bag is that it actually features 6 integrated straps that are designed to hold it in…

view full answer...

Answer 4

We actually got a chance to test out a few of our cargo bags, including the Curt #C18211 just the other day. The bag itself measures 56" long x 22" wide x 21" tall. We found it to be extremely roomy we were able to fit about 5 duffel…

view full answer...

Answer 5

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 6

I would be happy to! To add a hitch to your 2024 Genesis GV80, I recommend the etrailer item #e65KR. This hitch is custom fit and bolts to your Genesis with included hardware. I really like the etrailer Hitch because the crosstube mounts behind your…

view full answer...

Answer 7

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

There are unfortunately no replacement straps for the Curt Cargo Bag for Hitch Mounted Cargo Carrier #C18211 so you will need to look into alternatives as replacements, or choose a replacement hitch cargo bag from the linked selection. The exhaust…

view full answer...

Answer 10

You can use a larger than needed cargo bag on a cargo carrier like what you mentioned. Basically you'd have more cargo room available than needed but as long as you secure the bag down well it won't be an issue at all. You can use a cargo net…

view full answer...

What Size Padlock Can be Used with the Curt Cargo Bag # C18210

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching