Can P3 Brake Controller Replace Integrated Brake Controller of 2012 Ram 3500

Question:

i have a trailer with elec/hyd brakes, my 2012 Ram OEM controller will not work with this setup. I asked dealer if they could bypass the oem controller so I would not get warning light but dealer said they could not do that? Should i talk to a different dealer or what is my next option? Dodge Ram 3500 DRW

asked by: Randy M

Expert Reply:

Yes, you need to find a dealer that is willing to help you. The one you went to must not be aware of the fact that the integrated controller of your 2012 Ram can be replaced.

To use a trailer with electric over hydraulic brakes, you will need to install an aftermarket brake control. To install an aftermarket brake control you will have to disconnect the ITBM. This will turn on a warning lamp on the instrument cluster. In order to disconnect the ITBM and not get the warning lamp, your local Dodge dealer will have to reconfigure the TIPM (Totally Integrated Power Module), of the truck. Once the TIPM has been reconfigured, and the ITBM has been unplugged, you can use a vehicle specific brake control harness such as the Tekonsha # 3021-P to install the P3 part # 90195 and be good.

To disconnect the ITBM, you will need to contact Business Center to remove the sales code (XHC). The TIPM will need to be reconfigured. Once the sales code has been disabled you can disconnect the ITBM electrical connector, under the dash, without getting the warning lamp.

expert reply by: Jameson C