Bow Roller Recommendation to Fit 4 inch Roller that is Too Long
Question:
Hi , it seems I have 4” bow roller installed in a 3 1/2” wide bracket ... the boat came with this installed and it never rolled ... what should I purchase to make this fuction correctly ? Also the bells on the ends are quite deformed , is this normal ? Thanks for your time ... Regards ,
asked by: Barney
Expert Reply:
Looks like you have the part # YR450BLK-400BLK installed and are needing the next size down which happens to be the part # YR300BLK-325BLK. This fits the same 1/2 inch diameter shaft but is 1 inch shorter than what you have.
Your bell ends being deformed would not be a good sign.
Products Referenced in This Question
Bow Roller Assembly w/ Bells for 3" Wide Bracket - TPR - 1/2" Shaft - Black
- Boat Trailer Parts
- Rollers
- Bow Roller
- 3 Inch Diameter
- Thermoplastic - Standard
- 3 Inch Long
- Yates Rubber
more information >
Bow Roller Assembly w/ Bells for 4" Wide Bracket - TPR - 1/2" Shaft - Black
- Boat Trailer Parts
- Rollers
- Bow Roller
- 3-1/4 Inch Diameter
- Thermoplastic - Standard
- 3-3/4 Inch Long
- Yates Rubber
more information >
Product Page this Question was Asked From
Yates Bow Roller for Boat Trailers - Heavy-Duty Rubber - 3" Long - 1/2" Shaft
- Boat Trailer Parts
- Rollers
- Bow Roller
- 3 Inch Diameter
- Black Rubber
- 3 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Shop: Bow Roller Assembly w/ Bells for 4" Wide Bracket - TPR - 1/2" Shaft - Black
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long - 1 Pair
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
- Shop: Stainless Steel Hex Lag Screw - 3/8"
- Video: Bow Roller Assembly with Bells Review
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: How to Determine Correct Over-the-Hub Disc Brakes for Boat Trailer
- Video: Redline Brake Assembly Mounting Hardware Installation
- Video: Kodiak Trailer Bearings Races Seals Caps - Caps - XLPROLUBE1980KIT Review
- Video: Review of Kodiak Trailer Brakes - 10" Hub/Rotor Dacromet Disc Brakes - KOD49FR
- Video: Review of Kodiak Trailer Brakes - 10 Inch Hub/Rotor Dacromet E-Z Lube Disc Brakes - KOD59FR
- Q&A: Parts to Replace Long Carpeted Bunk Board on Mastercraft Boat Trailer
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Availability of 9-1/2 Foot Carpeted Bunk Boards for Boat Trailer
- Video: CE Smith Boat Trailer Carpeted Bunk Boards Review and Installation
- Q&A: Looking for a Replacement Handle for a Knott Autoflex Hand Winch
- Q&A: PSI Rating for ST205/75R14 Load Range C Trailer Tires
- Search Results: 4 inch bow roller
- Shop: BOLT brand vehicle and hitch locks
- Search Results: coupler pins locks
- Search Results: spare tire carrier
- Search Results: trailer guide on
- Shop: Trailer Wiring
- Search Results: bow roller
- Search Results: bow roller 3 inch