Weight Distribution Shank with Less Drop than Fastway Shank # FA92-02-4315

Question:

i have a 10,000 lb e2 weight distribution system with the 12inch shank. i recently changed trailers and the new trailer is much higher off the ground meaning i had to move the hitch up on the shank to the top hole, leaving a few inches of extra shank at the bottom. im wondering if you have a shorter shank to improve ground clearance.

asked by: John E

Expert Reply:

Sounds like you have the FastWay E2 shank part # FA92-02-4315 which is a 12 inch long shank that can do 12 inches of rise and 8 inches of drop

The part # FA92-02-4214 is a similar shank that would give you a few more inches of ground clearance and would not hang below the head of the system like your current one is doing.

expert reply by: Jameson C