Replacement Hub and Drum Assemblies with Inner Bearing 25580 and Outer Bearing 15123
Question:
hello . I am looking at purchasing the following hub and drum assembly akhd-655-6-ez-k four of them for a trailer i recently purchased. My understanding is that they are dexter axles about 8.5 foot wide. The spindle diameter for the outer bearing is approximately 1.25inch and the spindle diameter for the inner bearing is 1.75. my spindles dont have a step like in your drawing between d and c it is more like a taper. I purchase the bearings 25580 and 15123, as per your product information, from the local auto stores and they fit just perfect. I could read inner bearing number same as yours. I could not read the outer bearing part number. My concern do you know if the taper on my spindle between d and c would make a difference to the way your drawing showing a step? Also I have 12x2inch brakes would this product fit? Thank you for your help.
asked by: David S
Helpful Expert Reply:
If the existing inner and outer bearings on your trailer are indeed # 25580 and # 15123 respectively, then the Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K referenced in your question will work perfectly. You will also just want to take note of the axle capacity on your trailer, as this assembly is designed for 5,200 to 6,000 pound axles. The taper that you mentioned on your trailer's spindle is not an issue. This hub and drum assembly features a 6 on 5-1/2 inch bolt pattern and the bearings, races and grease seal are included.
This assembly is compatible with 12 x 2 inch brakes such as # AKEBRK-6L and # AKEBRK-6R. If your existing brake assemblies measure 12 inches wide and 2 inches deep, they will work well with these hubs.
I have attached a couple short video demonstrations on these products that you can also check out.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Pollak Wiring PK11761 Review
- Video: Pollak Wiring - Trailer Connectors - PK11720 Review
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2006 Dodge Ram Pickup
- Video: etrailer Trailer Brakes AKEBRK-6L Review
- Q&A: Left And Right Brake Assemblies For A 2011 Keystone Alpine 3500RE
- Q&A: What is the Difference Between 7-Way RV and Utility Trailer Connectors
- Search Results: 7 pin round connector
- Search Results: electric drum brakes
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: 7-Pole Rubber Socket Boot
- Shop: Autowbrake Electric Brake Controller - Trailer Mount w/ Remote Fob - 1 to 3 Axles - Proportional
- Shop: CR Brophy Replacement 7-Pole, Trailer Connector Socket - Vehicle End
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket - Vehicle End
- Q&A: Converting from 5 on 4-1/2 Inch Trailer Hubs to 6 on 5-1/2 Inch Hubs
- Q&A: Replacement Hubs Compatible with Dexter Mobile Home Axle
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Replacement Hub for #42 Spindle on Homemade Trailer
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Search Results: safety chain attachments
- Search Results: 7000 lb dexter axle
- Search Results: tow chains
Ben K.
8/1/2020
I have the same inner and outer bearing dimensions but was wondering if there was a hub and drum option you offer for 5 on 5.5 bolt pattern