How to Wire the Left Rear Camper Tail Light # 30-92-003
Question:
I am replacing both rear running,turn,brake lights. I replaced the left/License plate side light and cant get the running light to work. I have the blinker and brake light connected but no running light. Its a simple tree wire system. I cant figure why It wont work.
asked by: Jacob/Washington
Expert Reply:
When wiring the # 30-92-003 Tail light with license plate light, you should only have one wire going to the turn/stop signal connection and one wire going to the taillight connection on each side of the trailer.
The Left side turn/stop wire on the trailer is yellow, Right side turn/stop wire is green, taillight wire should be brown.
On the left side you should connect the yellow wire from your trailer lighting to the green wire on the # 30-92-003 tail light, and connect the brown wire from the trailer to the black wire on the tail light. You will also need to make sure that the white wire is connected to a good ground location. Check out the video of how the light is wired that we produced for you.
If your wiring is connected in this manner and it is still not working, you will need to find a short or bad ground in the trailer wiring.
![Bob G](https://images.etrailer.com/static/images/catg/people/287_tn.jpg)
Paula
2/6/2020
Can you tell me what each of the wires are? Green, white and black? I’m trying to connect a camera to my trailer and need to make sure I’m tapping into the correct wires. I think the green is positive and the white negative. Thanks.