Recommended Hub Assemblies and Bearing Buddies for SeaDoo Trailer
Question:
Want to replace hub assembly on seadoo trailer. Hubs are dexter 8-259 but bearings have no number. Races stamped 44610. Axle is 1.060. Can you recommend proper hub?
asked by: Rob
Expert Reply:
Thanks for the information you gave. I recommend the Trailer Hub Assembly for 8" to 12" Wheels - 5 on 4-1/2 with GAL-DEX Coating # 8-259-50UC1. These Dexter assemblies have a galvanized coating to assist since your trailer is going to be used in water. You may also want to consider the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS which will protect your bearings while submerged in water or salt water. These have a built in grease zerk that a grease gun like # 30-800 and # L54FR will work well with.
Products Referenced in This Question
LubriMatic Mini Grease Gun with Straight Pipe - 12" Hose
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 4500 psi
- 3 oz
- LubriMatic
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Hub for Dexter 8-259 Idler Hub
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Q&A: Replacement Idler Hub For Tie Down 11029C On 1-1/16" Straight Spindle with 5 on 4-1/2" Bolt Pattern
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Q&A: Replacement Dexter Trailer Axles Marked 8-259
- Article: Pewag Snow Tire Chains
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Measuring a Trailer Tire
- Article: Trailer Wiring Diagrams